Inserting Your Memory Card - Epson Stylus Photo RX600 User Manual

Inserting Your Memory Card

1. Make sure your Stylus Photo RX600 is not connected to your computer, or
turn off your computer.
2. Open the memory card slot cover.
3. Make sure the memory card light (next to the card slots) is off and that no
cards are inserted. Then insert a card into the correct slot, as shown.
CompactFlash or
Microdrive (bottom)
SmartMedia (top)
The memory card light turns green.
Note:
If the card is not properly formatted, you see a message on the RX600 screen.
Press the button indicated on the RX600 screen to format the card. Any data stored
on the card will be erased.
MemoryStick (middle)
Memory
card light
Scanning Film or Slides to a Memory Card
SD or MMC (middle)
xD (top)
107