3. Open the memory card slot cover.
4. Make sure the memory card light (next to the memory card slots) is off and
that no cards are in any of the slots. Then insert a card into the correct slot, as
shown.
CompactFlash or
Microdrive (bottom)
SmartMedia (top)
The memory card light flashes, then turns green.
To remove the card, pull it straight out of its slot.
Caution:
Do not insert more than one card into a shared memory card slot.
Do not remove the card or turn off the Stylus Photo RX600 while the memory card light
is flashing, or you may lose data.
MemoryStick (middle)
Memory
card light
Inserting and Removing Memory Cards
SD or MMC (middle)
xD (top)
85