7. Press the sides of the left edge guide together and slide it all the way to the left.
8. Insert your paper—short edge first—against the right edge of the sheet feeder,
behind the tab.
9. Press the sides of the left edge guide together and slide it against the paper
(but not too tightly).
Note:
Do not place the paper in front of the feeder guard.
10. Flip the feeder guard back over the paper.
11. Press the
Copy
at the top of the RX600 screen. This prints a photo or document with
Copy
borders.
button to set the RX600 to Copy mode. You see
Copying Without a Computer
Standard
23