Ink Cartridge Precautions; Removing And Installing Ink Cartridges - Epson Stylus Photo RX600 User Manual

Ink Cartridge Precautions

Warning:
Keep ink cartridges out of the reach of children.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your
eyes, flush them thoroughly with water.
Caution:
To avoid damaging the printer, never move the print head by hand.
You can't print if an ink cartridge is empty. Leave the empty cartridge installed in the
Stylus Photo RX600 until you have obtained a replacement. Otherwise the ink
remaining in the print head nozzles may dry out.

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
1. If an ink cartridge is empty:
Look at the icon in the upper right corner of the RX600 screen to see which
cartridge is empty, then press the
If an ink cartridge is low:
Press the
Setup
select
Ink Cartridge
upper right corner of the RX600 screen to see which cartridge is low or check
the ink levels as described on page 132.
2. Use the side grips to open the scanner unit, as shown, making sure to keep the
scanner lid closed on top.
OK
button to enter setup mode. Press the u and d buttons to
, press , then press
OK
button.
again. Look at the icon in the
OK
Replacing Ink Cartridges
133