Lightening Or Darkening Copies; Restoring Color As You Copy - Epson Stylus Photo RX600 User Manual

Lightening or Darkening Copies

1. Press the
2. Press the d button to choose C
3. Press the l button to lighten or the r button to darken your copies.
4. Press the

Restoring Color as You Copy

You can bring an old 4 × 6-inch photo back to life as you copy it onto Premium
Glossy Photo paper. (You can restore only 4 × 6-inch photos using this method.)
1. Press the
2. Choose
Copy Layout
to select
3. Press the
4. Press the
5. Press the d button to choose
6. Press the l button to choose
automatically.
7. Press the x
copy and restore your photo.
Note:
If you see an error message telling you the RX600 can't detect your original photo,
make sure the photo size is 4 × 6 inches. If you placed more than one photo on the
scanner glass, make sure they are at least 1 inch apart.
To restore the color in an old film strip photo or slide as you copy it in Film Print mode,
see page 101. To restore colors to photos as you scan them, see page 68.
28
Copying
button to display the
Menu
button to go back to the additional copy settings.
OK
button to display the
Menu
with the u and d buttons and use the l and r buttons
.
Multi-Photo
button. You see a layout screen.
OK
button again. You see the Multi-Photo menu.
OK
button and follow the instructions on the RX600 screen to
Color
Copy Menu
.
opy Density
Copy Menu
.
Restoration
. Your photo paper type and size are selected
On
on the RX600 screen.
on the RX600 screen.