Printout Problems; The Font Cannot Be Printed; Printout Is Garbled - Epson AcuLaser M7000N series User Manual

Note:
For the additional driver to be installed, please see the table below.
Server OS
*
Windows XP
Windows XP x64, Server 2003, or
*
Server 2003 x64
Windows 7, Vista, Vista x64, Server
2008, Server 2008 x64, or Server 2008
R2
*
The additional driver for Windows XP x64 and Server 2003 x64 can be used on Windows XP Service Pack 2, Windows 2003
Service Pack 1, or later.

Printout Problems

The font cannot be printed

Cause
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.

Printout is garbled

Cause
The interface cable may not be plugged in securely.
Client OS
Windows XP clients
Windows XP x64 clients
Windows XP clients
Windows XP x64 clients
Windows 7, Vista, or XP clients
Windows 7 x64, Vista x64, or XP x64
clients
What to do
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the Font
Guide for more information.
What to do
Make sure that both ends of the interface cable are plugged in
securely.
Epson AcuLaser M7000 Series
Additional Driver
Intel Windows 2000 or XP
x64 Windows XP
Windows XP and Windows Server
2003
x64 Windows XP and Windows Server
2003
x86 Type 3 - User Mode
x64 Type 3 - User Mode
Troubleshooting
User's Guide
150