The Printer Does Not Print Correctly In The Postscript Mode; The Printer Does Not Print; Only) - Epson AcuLaser M7000N series User Manual

The printer does not print correctly in the PostScript mode

Cause
The printer's emulation mode setting is incorrect.
The printer's emulation mode setting for the interface
that you are using is incorrect.

The printer does not print

Cause
An incorrect printer driver is selected.
The Emulation Menu in the printer's Control Panel is set
to a mode other than Auto or PS3 for the interface that
you are using.
The printer or its driver does not appear in utilities in the printer configuration
(Macintosh only)
Cause
The printer name has been changed.
The AppleTalk zone setting is incorrect (for Mac OS X
10.4/10.5).
Epson AcuLaser M7000 Series
What to do
The printer is set to the Auto mode by default, so that it can
automatically determine the encoding used in the received print
job data and select the appropriate emulation mode. However,
there are situations where the printer cannot select the correct
emulation mode. In this case, it must be set manually to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See "Emulation Menu" on page 61.
The emulation mode can be set individually for each interface
which receives print job data. Set the emulation mode for the
interface you are using to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See "Emulation Menu" on page 61.
What to do
Make sure that the PostScript printer driver that you are using to
print is selected.
Change the mode setting to either Auto or PS3.
What to do
Ask the network administrator for details, then select the
appropriate printer name.
Open the Print & Fax (for Mac OS X 10.5) or Printer Setup Utility
(Mac OS X 10.4 or below), then select the AppleTalk zone that the
printer is connected to.
User's Guide
Troubleshooting 161