Output Tray; Selecting And Using Print Media; Labels - Epson AcuLaser M7000N series User Manual

Compact a3 mono series
Hide thumbs Also See for AcuLaser M7000N series:
Table of Contents

Advertisement

Output Tray

The output tray is located on the top of the printer. Since printouts are output face-down, this tray is
also referred to as the facedown tray. Up to 250 sheets can be stacked when using the plain paper.
Extend the paper support to accommodate the size of the paper loaded in the MP tray or lower paper
cassette to prevent it from slipping off the printer.

Selecting and Using Print Media

You can use special media, such as labels, envelopes, thick paper, and transparencies. The instructions
below describe loading special media in the MP tray as an example.
When loading special media, you should make paper settings. You can also make these settings on the
Tray Menu in the control panel. See "Tray Menu" on page 60.
Note:
Since the quality of any particular brand or type of media may be changed by the manufacturer at any
time, Epson cannot guarantee the quality of any type of media. Always test samples of media stock before
purchasing large quantities or printing large jobs.

Labels

Available labels
❏ Labels designed for laser printers or plain-paper copiers
Epson AcuLaser M7000 Series
User's Guide
Printing Tasks
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser m7000dnAculaser m7000dtnAculaser m7000 series

Table of Contents