How To Register Menus As Bookmarks - Epson AcuLaser M7000N series User Manual

Use the u Up and d Down buttons to scroll through available settings, then press the r Right
button to select a setting and return to the previous level. Press the l Left button to return to the
previous level without changing the setting.
Note:
❏ You need to turn the printer off and then on to activate some settings. For details, see "Control
Panel Menus" on page 58.
❏ The OK button can be used instead of the r Right button in step 3 or 5.
6. Press the Start/Stop button to exit the control panel menus.

How to register menus as bookmarks

By registering bookmarks for frequently used menus, you can display the registered menus by just
pressing the OK button while the LCD panel displays Ready.
Note:
The maximum number of menus you can register as bookmarks is 3.
1. Display the menu to register. For details, see "How to access the control panel menus" on
page 56.
2. Press the OK button for more than two seconds.
The Add Bookmark menu appears.
Note:
Some menus cannot be bookmarked. If you tried to register them, Bookmark Failed is displayed.
3. Press the u Up and d Down buttons to select the menu to delete, then press the r Right button.
Note:
To register a new menu, you have to delete one of the registered menus from the bookmark.
If Bookmark Registered is displayed, the menu is bookmarked successfully.
Note:
To restore the bookmark menus to the default values, select SelecType Init from the control panel's
Reset Menu.
Epson AcuLaser M7000 Series
Using the Control Panel
User's Guide
57