The Printer Does Not Turn Off; The Printer Does Not Print (Ready Light Off); The Ready Light Is On But Nothing Prints - Epson AcuLaser M7000N series User Manual

Cause
The printer is in the sleep mode (the Wake Up/Sleep
button lights) or in the power off mode (the Wake Up/
Sleep button blinks).

The printer does not turn off

Cause
The printer is in the power off mode (the Wake Up/Sleep
button blinks).

The printer does not print (Ready light off)

Cause
The printer is offline.
Some error may have occurred.
The printer is in the power off mode (the Wake Up/Sleep
button blinks).

The Ready light is on but nothing prints

Cause
Your computer may not be properly connected to the
printer.
The interface cable may not be plugged in securely.
Epson AcuLaser M7000 Series
What to do
Press the Wake Up/Sleep button to return the printer to ready
status.
What to do
Wait for a while. The printer turns off in approximately 50 seconds.
To not enter the power off mode, set Power Off Timer to Off in
Energy Saver Menu on the control panel. See "Energy Saver
Menu" on page 82.
What to do
Press the Start/Stop button once to switch the printer to ready
status. Make sure that the Ready light turns on.
Check the LCD panel to see if an error message appears.
Press the Wake Up/Sleep button to return the printer to ready
status.
To not enter the power off mode, set Power Off Timer to Off in
Energy Saver Menu on the control panel. See "Energy Saver
Menu" on page 82.
What to do
Perform the procedure illustrated in the Setup Guide.
Check both ends of the interface cable between the printer and
the computer.
User's Guide
Troubleshooting 148