Removing The Duplex Unit - Epson AcuLaser M7000N series User Manual

Epson AcuLaser M7000 Series User's Guide
5. Reconnect the interface cable and power cord, then turn the printer on.
To confirm that the option is installed correctly, print a configuration status sheet. See "Printing a
Configuration Status Sheet" on page 147.

Removing the Duplex Unit

1. Turn the printer off and unplug the power cord and interface cable.
2. Loosen the two screws on the Duplex Unit.
3. Press the unlock button to unlock the hooks, then remove the Duplex Unit from the printer.
4. Attach the duplex unit connector cover that was removed when installing the Duplex Unit.
5. Attach the upper and lower option covers that were removed when installing the Duplex Unit.
Installing Options 109