Status And Error Messages - Epson WorkForce AL-C500 Series User Manual

AL-C500 Series User's Guide
❏ System Information
To register the menus in bookmark, see "How to register menus as bookmarks" on page 61 for details.

Status and Error Messages

This section contains a list of error messages shown on the LCD panel, a brief description of each
message and suggestions for correcting the problem. Note that not every message shown on the LCD
panel indicates a problem. When the mark is displayed at the right of the warning/error message,
multiple warnings/errors occur. To confirm all warnings that occur, press the d Down button to
display the Status Menu, then press the r Right button. The LCD panel also displays the remaining
service life of the consumables and available paper sizes.
Bookmark Failed
The selected menu cannot be registered as a bookmark. Some menus cannot be registered as
bookmarks.
Bookmark Registered
The selected menu is registered as a bookmark.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently
receiving or printing. This message appears when the W Pause/Cancel button has been pressed
down for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message appears when the W Pause/Cancel
button has been pressed and released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Cannot Staple. Print without Staple?
The printer has encountered problems while stapling.
Pressing the Start/Stop button will print the rest of the print job without stapling.
Using the Control Panel 90