Chapter 3 Using The Control Panel; Using The Control Panel Menus; When To Make Control Panel Settings; How To Access The Control Panel Menus - Epson AcuLaser M7000N series User Manual

Chapter 3
Using the Control Panel

Using the Control Panel Menus

When to make control panel settings

In general, printer driver settings override settings made using the control panel.
You should make the following settings by using the control panel because these settings cannot be
made in the printer driver.
❏ Settings to select emulation modes and IES (Intelligent Emulation Switching) mode
❏ Settings to specify a channel and configure the interface
❏ Settings to specify the size of the memory buffer used to receive data

How to access the control panel menus

1. Press the r Right button to access the control panel menus.
2. Use the u Up and d Down buttons to scroll through the menus.
3. Press the r Right button to view the items in a menu. Depending on the menu, the LCD panel
displays an item and the current setting separated ( YYYY=ZZZZ), or only an item ( YYYY).
4. Use the u Up and d Down buttons to scroll through the items, or press the l Left button to return
to the previous level.
5. Press the r Right button to carry out the operation indicated by an item, such as printing a
configuration status sheet or resetting the printer, or to view the settings available for an item, such
as paper sizes or emulation modes.
Epson AcuLaser M7000 Series
Using the Control Panel
User's Guide
56