Table of Contents
Advertisement
Cause
You may not be using the correct interface cable.
The emulation setting for the port may not be correct.
Note:
If a configuration status sheet does not print correctly, your printer may be damaged. Contact your
dealer or a qualified service representative.
The printout position is not correct
Cause
The page length and margins may be set incorrectly in
your application.
The paper size setting may be incorrect.
The MP Tray Size setting may be incorrect.
Graphics do not print correctly
Cause
The printer emulation setting in your application may be
incorrect.
You may need more memory.
Epson AcuLaser M7000 Series
What to do
If you are using the parallel interface, make sure that the cable is a
double-shielded, twisted-pair interface cable no more than six
feet in length.
If you are using the USB interface, use a cable that is compatible
with Hi-Speed USB.
Specify the emulation mode by using the printer's control panel
menus. See "Emulation Menu" on page 61.
What to do
Make sure that you are using the correct page length and margin
settings in your application.
Make sure the correct paper size is set in the Tray Menu on the
control panel.
When loading paper for which the size is not specified with Auto
setting, specify the correct paper size by the tray paper size switch
or on the MP Tray Size setting in the Tray Menu on the control
panel.
What to do
Make sure that your application is set for the printer emulation
you are using. For example, if you are using the ESC/Page mode,
make sure that your application is set to use an ESC/Page printer.
Graphics require large amounts of memory. Install an appropriate
memory module. See "Memory Module" on page 110.
User's Guide
Troubleshooting
151
Advertisement
Table of Contents
