Printout Problems; The Font Cannot Be Printed; Printout Is Garbled; The Printout Position Is Not Correct - Epson Aculaser C2800 Series User Manual

Printout Problems

The font cannot be printed

Cause
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.

Printout is garbled

Cause
The interface cable may not be plugged in securely.
You may not be using the correct interface cable.
The emulation setting for the port may not be correct.
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified
service representative.

The printout position is not correct

Cause
The page length and margins may be set incorrectly
in your application.
The Paper Size setting may be incorrect.
MP Tray Size setting may be incorrect.
Downloaded from ManualsPrinter.com Manuals
AcuLaser C2800 Series
What to do
In the printer driver, choose the Print TrueType fonts as bitmap
button in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the
Font Guide for more information.
What to do
Make sure that both ends of the interface cable are plugged
in securely.
If you are using the USB interface, use a Revision 2.0 cable.
Specify the emulation mode by using the printer's control
panel menus. See "Emulation Menu" on page 151.
What to do
Make sure that you are using the correct page length and
margin settings in your application.
Make sure the correct paper size is set in the Tray Menu on the
control panel.
When loading paper for which the size is not specified with
Auto setting, specify the correct paper size on the MP Tray Size
setting in the Tray Menu on the control panel.
User's Guide
Troubleshooting 239