Table of Contents
Advertisement
2-34
Local Panel User Interface
SetPointPS PC Software
857-UM001A-EN-P – July 2009
The PC user interface can be used for:
On-site parameterization of the relay
Loading relay software from a computer
Reading measured values, registered values and events to a
computer
Continuous monitoring of all values and events
Two RS-232 serial ports are available for connecting a local PC with
SetPointPS to the relay; one on the front panel and one on the rear
panel of the relay. These two serial ports are connected in parallel.
However, if the connection cables are connected to both ports, only
the port on the front panel will be active. To connect a PC to a serial
port, use a connection cable Bulletin 857-VX003-3.
The SetPointPS program can also use TCP/IP LAN connection.
Optional hardware is required.
There is a free of charge PC program called SetPointPS available for
configuration and setting of Allen-Bradley relays. Please download
the latest SetPointPS.exe from our web page www.AB.com. For
more information about the SetPointPS software, please refer to the
programming manual, 857-PM001A-EN-P. Also the SetPointPS
user's manual is available at our web site.
Advertisement
Table of Contents
