2-33
Local Panel User Interface
Single Line Diagram Editing
The single-line diagram is drawn with the SetPointPS software.
For more information, please refer to the SetPointPS manual,
publication 857-PM001A-EN-P.
Bay
0 L
0A
0.000A
0kW
0Kvar
Figure 2.23 – Single Line Diagram
Blocking and Interlocking Configuration
The configuration of the blockings and interlockings is done with the
SetPointPS software. Any start or trip signal can be used for
blocking the operation of any protection stage. Furthermore, the
interlocking between objects can be configured in the same blocking
matrix of the SetPointPS software. For more information, please
refer to the SetPointPS manual.
857-UM001A-EN-P – July 2009