Allen-Bradley Rockwell Automation 857 User Manual page 18

2-2
Local Panel User Interface
857-UM001A-EN-P – July 2009
1. Freely configurable single-line diagram
2. Five controllable objects
3. Six object statuses
4. Bay identification
5. Local/Remote selection
6. Auto-reclose on/off selection (if applicable)
7. Freely selectable measurement values (max. six values)
11
10
12
8
Figure 2.3 – Sections of the LCD Matrix Display
8. Main menu column
9. The heading of the active menu
10. The cursor of the main menu
11. Possible navigating directions (push buttons)
12. Measured/setting parameter
13. Measured/set value
Backlight Control
Display backlight can be switched on with a digital input, virtual
input or virtual output. LOCALPANEL CONF/Display backlight
ctrl setting is used for selecting trigger input for backlight control.
When the selected input activates (rising edge), display backlight is
set on for 60 minutes.
9
13