2-28
Local Panel User Interface
Configuration and
Parameter Setting
(cont.)
857-UM001A-EN-P – July 2009
MOTOR CURRENTS
•
Rated current of the motor
VOLTAGE SCALING
•
Rated VT primary voltage (Uprim)
•
Rated VT secondary voltage (Usec)
•
Rated U
VT secondary voltage (Uosec)
0
•
Voltage measuring mode (Umode)
UNITS FOR MIMIC DISPLAY
•
Unit for voltages (V). The choices are V (volt) or kV (kilovolt).
•
Scaling for active, reactive and apparent power [Power]. The
choices are k for kW, kvar and kVA or M for MW, Mvar and
MVA.
DEVICE INFO
•
Relay type (Type Allen-Bradley 865)
•
Serial number (SerN)
•
Software version (PrgVer)
•
Bootcode version (BootVer)
DATE/TIME SETUP
•
Day, month and year (Date)
•
Time of day (Time)
•
Date format (Style). The choices are "yyyy-mm-dd",
"dd.nn.yyyy" and "mm/dd/yyyy".
CLOCK SYNCHRONISATION
•
Digital input for minute sync pulse (SyncDI). If any digital input
is not used for synchronization, select " " .
•
Daylight saving time for NTP synchronization (DST).
•
Detected source of synchronization (SyScr).
•
Synchronization message counter (MsgCnt).
•
Latest synchronization deviation (Dev).
The following parameters are visible only when the access level is
higher than "User".
•
Offset, i.e. constant error, of the synchronization source (SyOS).
•
Auto adjust interval (AAIntv).
•
Average drift direction (AvDrft): "Lead" or "lag".
•
Average synchronization deviation (FilDev).