Using And Changing Directional Controls - Mercury Avator 7.5e Operation, Maintenance And Installation Manual

3. Press the menu button to save the setting.
NOTE: Setup is complete. The display will revert back to the main screen.

Using and Changing Directional Controls

IMPORTANT: Observe the following:
•
Never change the directional control rapidly from reverse to forward
without stopping at neutral to allow the propeller to stop spinning.
This action could cause outboard and component damages.
•
Do not change the directional control into reverse when the forward
motion of the boat is greater than a no wake speed. This action
could cause outboard or component damages.
eng
OPERATION
0
%
READY READY
0
%
km/h
SA VED
100
%
mph
100
%
95
76169
76170