Mercury Avator 7.5e Operation, Maintenance And Installation Manual page 51

3. Hand tighten the torx screw.
4. Verify the quick‑disconnect is disabled by pulling the slide and attempting
to lift the outboard.
LIFTING THE OUTBOARD
IMPORTANT: Never lift the outboard from the battery handle while the battery
is installed in the outboard. Injury or product damage/loss could result.
1. Remove the battery from the outboard. Refer to Battery Removal.
IMPORTANT: The tiller handle must be locked in the operating position or the
folded up position.
eng
INSTALLATION
41
75507
76172