Mercury Avator 7.5e Operation, Maintenance And Installation Manual page 63

FRONT COWL LOWER PANEL INSTALLATION
1. Align the front cowl lower panel pins with the pin holes on the outboard.
2. Install the front lower cowl on the outboard with the four short hex head
screws.
b
3. Tighten the short hex head screws to the specified torque.
Description
Short hex head screws
eng
INSTALLATION
a - Short hex head screws (4)
b - Front cowl upper panel
a a a a
76045
Nm
3.3
53
76063
lb‑in. lb‑ft
29 –