Mercury Avator 7.5e Operation, Maintenance And Installation Manual page 57

5. Rear cowl upper panel
The cowl panels must be installed in the following sequence: (The port and rear
cowl panels may not need to be installed for some procedures).
1. Rear cowl upper panel
2. Port cowl panel
3. Starboard cowl panel
4. Front cowl lower panel
5. Front cowl upper panel
FRONT COWL UPPER PANEL REMOVAL
1. Remove the battery. Refer to Battery Removal.
2. Remove the four short hex head screws from the front cowl upper panel.
a
a
3. Remove the front cowl upper panel from the outboard.
eng
INSTALLATION
a
a -
b -
b
a
76043
47
Tiller model shown, other models
similar.
Short hex head screws (4)
Front cowl upper panel