Mercury Avator 7.5e Operation, Maintenance And Installation Manual page 4

Indicates a situation which, if not avoided, could result in motor damage,
battery damage, or component failure.
IMPORTANT: Identifies information essential to the successful completion of
the task.
NOTE: Indicates information that helps in the understanding of a particular step
or action.
IMPORTANT: The operator (driver) is responsible for the correct and safe
operation of the boat, the equipment aboard, and the safety of all occupants
aboard. Mercury Marine strongly recommends that the operator read this
Operation and Maintenance Manual and thoroughly understand the operational
instructions for the power package and all related accessories before the boat
is used.
California Proposition 65
WARNING: This product can expose you to chemicals, which
are known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Descriptions and specifications contained herein were in effect at the time
this was approved for printing. Mercury Marine, whose policies are based on
continuous improvement, reserves the right to discontinue models at any time
or to change specifications or designs without notice and without incurring
obligation.
Warranty Message
The product you have purchased comes with a Mercury Marine Limited
Warranty. The terms of the warranty are set forth in the Warranty Manual,
which can be accessed any time on the Mercury Marine website, at
www.mercurymarine.com/warranty‑manual. The Warranty Manual contains a
description of what is covered, what is not covered, the duration of coverage,
how to best obtain warranty coverage, important disclaimers, limitations,
and waivers, and other related information. Please review this important
information.
Mercury Marine products are designed and manufactured to comply with our
own high quality standards, applicable industry standards and regulations, and
certain emissions regulations. At Mercury Marine every outboard is operated
and tested before it is boxed for shipment to make sure that the product is
ready for use. In addition, certain Mercury Marine products are tested in a
controlled and monitored environment, for up to 10 hours of outboard run
time, in order to verify and make a record of compliance with applicable
standards and regulations. All Mercury Marine product, sold as new, receives
the applicable limited warranty coverage, whether the outboard participated in
one of the test programs described above or not.
NOTICE
ii
http://
eng