Misc. On The Deskline Dl1A System; Warranty; Maintenance - Linak Deskline DL1A User Manual

Misc. on the DESKLINE
This system is a DESKLINE system developed for desks and for indoor use. Do not
use it in industrial kitchens or in other enviroments that have to be cleaned with
aggressive detergents.
Do not bolt the legs to the fl oor so that free movement is prevented. This could
cause serious damage to the legs in fault situations.

Warranty

There is a 36 months' warranty on the DESKLINE products against manufacturing
faults from the production date of the individual products (see label).
LINAK A/S' warranty is only valid in so far as the equipment has been used and
maintained correctly and has not been tampered with. Furthermore, the system
must not be exposed to violent treatment. In the event of this, the warranty will be
ineffective/invalid. For further details, please see LINAK A/S ordinary conditions of
sale.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect
them for damage and breaks.
Inspect the connections, cables, and plugs and check for correct functioning as well
as fi xing points.
The cleaners and disinfectants must not be highly alkaline or acidic
(pH value 6-8).
Service of double-insulated products:
Class II
A Class II or double insulated electrical appliance is one which has been designed
in such a way that it does not require a safety connection to electrical earth (US:
ground).
The basic requirement is that no single failure can result in dangerous voltage
becoming exposed so that it might cause an electric shock and that this is achieved
without relying on an earthed metal casing. This is usually achieved at least in
part by having two layers of insulating material surrounding live parts or by using
reinforced insulation.
There is no earthing/grounding means provided on the product, and no earthing/
grounding means is to be added to the product.
In Europe, a double insulated appliance must be labelled "Class II", "double
insulated" or bear the double insulation symbol (a square inside another square).
Servicing a double-insulated product requires extreme care and knowledge of the
system, and is to be done only by qualifi ed service personnel. Replacement parts for
a double-insulated product must be identical to the parts they replace.
®
DL1A system
7