Table of Contents
Advertisement
Maintenance
Replacing spare parts
Accessories/spare parts
Operating instructions, German
Electronic controller
24 V DC to 32 V DC
48 V DC to 60 V DC
110 V DC to 125 V DC / 100 V AC to 120 V AC
220 V DC to 250 V DC / 230 V AC to 240 V AC
Shunt release Y1
24 V DC to 32 V DC
48 V DC to 60 V DC
110 V DC to 125 V DC / 100 V AC to 120 V AC
220 V DC to 250 V DC / 230 V AC to 240 V AC
Mechanical closing latching with shunt release Y1
24 V DC to 32 V DC
48 V DC to 60 V DC
110 V DC to 125 V DC / 100 V AC to 120 V AC
220 V DC to 250 V DC / 230 V AC to 240 V AC
Auxiliary switch for 3-pole vacuum contactor
Auxiliary switch (S1.1) with 2NO + 2NC, left, 3-pole
Auxiliary switch (S1.2) with 2NO + 2NC, right
Auxiliary switch (S1.1) with 3NO + 3NC, left
Auxiliary switch (S1.2) with 3NO + 3NC, right
Auxiliary switch for 1-pole vacuum contactor
Auxiliary switch (S1.1) with 2NO + 2NC, left
Auxiliary switch (S1.2) with 2NO + 2NC, right
Manual unlatching
with push rod
with draw bar
Vaseline (contact grease)
For example, Atlantic white, Atlantic Mineralölwerk GmbH
42
Accessories and spare parts
To ensure that the device operates reliably, spare parts must be replaced only by
qualified personnel.
CAUTION
Risk of injury!
Put the vacuum contactor in the OPEN position. Operate the manual unlatching
if available.
Separate the vacuum contactor from the supply voltage/switch it off and release
and remove the low-voltage connector.
Remove the vacuum contactor from the system or switch cabinet for maintenance
work.
Fig. 45
Accessories available for order
For spare part orders, indicate the type and serial number of the vacuum contactor
in accordance with the rating plate.
Order number
9229 0106 176
3TY5902-0AB0
3TY5902-0AB0
3TY5902-0AB1
3TY5902-0AB1
3TY5903-0AT0
3TY5903-0AU0
3TY5903-0AV0
3TY5903-0AW0
3TX5903-0AT0
3TX5903-0AU0
3TX5903-0AV0
3TX5903-0AW0
3TY5901-0DA0
3TY5901-0DB0
3TY5901-0EA0
3TY5901-0EB0
3TY5901-0DA1
3TY5901-0DB1
3TX5904-0AA1
3TX5904-0AA0
3AX1133-4A
Comment
Catalogue supplement -
Z L03
Standard design
Standard design
Standard design
Standard design
Release voltage of unlatch-
ing
Release voltage of unlatch-
ing
Mounted on side plate, with-
out wiring
Mounted on side plate, with-
out wiring
M4 threaded rods without
terminators
Pasty consistency, ignition
point 210 °C, low acid
9229 0106 176 0-
2020-09-18
Advertisement
Table of Contents
