Service Information; Maintenance; Panel Connection; Spare Parts Order - Siemens NXAirS Manual

NXAirS description
11. Service information

11.1 Maintenance

Maintenance during>10 years under normal environment and operation.
A completed record must be made after maintenance
●
All maintenance work must be carried out by qualified person
●
Original parts for exchange
●
For secondary component, refer to related manual by sub-supplier
●
For ES,it is necessary to check completely after 1,000 operating cycles
●
For cassette, it is necessary to check completely after 1,000 operating cycles
●
11.2 Panel connection
Panel can be connected from both sides without any modification to the panel
Please consult our company when connect panel and change components
11.3 Spare parts order
Description for spare parts and components of the device
Type and factory code of panel and module SION (according the basic data table)
●
For the description of device or components, please refer to the description, photo, drawing, table and electrical
●
circuit drawing.
11.4 Change compartments and components
Switching compartment and cable connection compartment adapt side board design, double metal Partition between
compartments. The cable connection compartment and switching compartment keep separated when compartment is
taken away. For the standard scheme, there is no metal Partition between the compartments of the busbar area. When
change compartment, please consult our company.
Separated components, such as metering tools, CT, can be changed, please consult our company when change
component.
11.5 Waste disposal
NXAir is a panel of environmental protection
Panel is made of sendzi-mir-glavanized steel sheet, the door and terminal board are powder-coated with epoxy-resin.
Material of the panel can be recycled to the most extent, environmental-friendly and protective according to the current
law.
Components of the panel can be recycled as mixed waste, better to environment with classification of the waste.
Deposal of the electronic waste shall be according to the current regulation.
Panel is made of the following material:
sendzi-mir-glavanized sheet-steel
●
Copper
●
Aluminum
●
Poly carbonate
●
Stainless steel
●
Epoxy-resin
●
Casted resin
●
Plastic
●
Rubber
●
Ceramic
●
Lubrication
●
Iron bolt, gasket, nut
●
NXAirS Withdrawable Metal-enclosed Switchgear, Rated Voltage Up to 12kV
13