Main Mixer Block - Panda-Audio Future Impact v3 User Manual

Sync of LFO4
The range of MIDI Sync is 30-480 BPM. If the incoming clock signal is outside that
range then it will be limited to the border value closest to it. (A program that uses
MIDI Sync defaults to 120 BPM if no MIDI clock signal is detected at the point it is
loaded.)
● KBD PRIORITY (LOWER, UPPER, FIRST, LAST):
Keyboard priority. This parameter determines what happens if you play more than
one note at a time. LOWER: Whichever note is lowest will be played. UPPER:
Whichever note is highest will be played. FIRST: Whichever note was pressed first
will be played. LAST: Whichever note was pressed last will be played.
● PBD RANGE (0...24):
Sets the pitch bend range (both up and down) in semitones when the pitch bend
wheel is used.

Main Mixer Block

This is a simple two-channel audio mixer situated before the final output to the effect section.
Moving from left to right, the sliders in this block are as follows:
● INSTR (0...127):
Sets the volume of the clean input instrument signal. Unity gain is at 127.
● VCF LIN (0...127):
Sets the volume of the signal coming from the output of the entire
linear scale. (This signal comprises all five sliders of the
through the filter section).
● VCF LOG (0...127):
Adjusts the same signal as the VCF LIN slider but instead uses a logarithmic scale.
This gives a more natural sweep of the input values and so offers a useful alternative
for controlling the VCF volume path when working with
for details.
Go to Table of Contents
VCF Block
VCF INPUT section, routed
Flexi Controllers.
using a
50