Panda-Audio Future Impact v3 User Manual page 100

● What is the difference between the FI I and the FI v3?
The two pedals are absolutely identical, other than the differing decal on the top.
● Can I load the v3.60 firmware onto my FI I?
Yes! An FI I can be upgraded to the v3.60 firmware free of charge. Please refer to the
question above entitled "How do I update my pedal's firmware?"
● Can I freeze/sustain the sound?
Yes! The FI has a
portion of a sound at a fixed pitch and then play over the top of it.
● How do I set the MIDI channel on the FI?
The MIDI channel is set using the
● Why isn't my MIDI interface working with the FI?
Whilst most MIDI interfaces are well implemented and can transfer large SysEx
packages such as the FI firmware update, some manufacturers do not test their
devices carefully enough to ensure they don't suffer from data loss when sending
large packages. While these poorly-tested MIDI interfaces can be used for all other
functions of the FI Editor, they cannot be used for updating the firmware. Do not
worry, even if an error occurs during the update process, it will not damage your FI in
any way; after a failed update the FI will remain fully functional.
Please see the list of
of the ones known to work and you should have no further trouble.
Sustain feature. You can use it to indefinitely sustain the synth
Boot
Compatible MIDI Interfaces
Go to Table of Contents
Menu. Please read that section for details.
in the MIDI section. Choose one
100