The Menu Bar; The File Menu - Panda-Audio Future Impact v3 User Manual

Important: The FI's MIDI OUT must only ever be connected to the computer's MIDI IN using
the FI Input Device option. If you were to connect the FI's MIDI OUT to the computer's MIDI
IN using the Keyboard Input Device option then that input device's MIDI Thru feature would
cause an infinite MIDI loop.

The Menu Bar

Here you can find the tabs for switching between the
home to menu functions which apply to both the Manager and the Editor (except where
indicated otherwise). We have already covered the items found in the
section above; the remaining items are explained below.

The File Menu

The options in this menu are explained below.
● Select Directory: Specifies the location that the
program files. (Note that this option has no function in the Manager.)
● Load Program from File to Editor: Loads a program from your computer into the
Editor. The FI v3 Editor can load program files that were created with a pre-v3 Editor
(*.prg), but will convert these to the v3 format (*.pr3) when saving.
● Save Program from Editor to File: Saves an edited program to your computer.
3
Please see the final note of the Accent parameter description located near the end of the
section which concerns compatibility of .prg-format programs that use MIDI velocity information.
Manager
Go to Table of Contents
and Editor views. It is also
MIDI Menu
Editor uses for loading and saving
3
in the
Filter
22