Effect 2: Equalizer - Panda-Audio Future Impact v3 User Manual

Effect 2: Equalizer

The Equalizer consists of a bass shelf tone control, two parametric band equa li zer stages,
and a treble shelf tone control.
Moving from left to right, the sliders unique to this effect are as follows:
● BASS FRQ (0...127):
Adjusts the frequency of the bass shelf filter in the range of 50...270 Hz.
● BASS SLOPE (0...127):
Adjusts the steepness of the bass filter in a range of 3...10dB/octave.
● BASS BOOST (-20...+20):
Boosts or cuts the bass by up to 20dB.
● MID1 FRQ, MID2 FRQ (0...127):
Adjusts the center frequency of the equalizer stages in the range of 170...7000Hz.
● MID1 Q, MID2 Q (10...100):
Adjusts the resonance (Q) of the equalizer stages in a range of 1...10.
● MID1 BOOST, MID2 BOOST (-20...+20):
Boosts or cuts the equalizers by up to 20dB.
● TREBLE FRQ (0...127):
Adjusts the frequency of the treble shelf filter in the range of 2000...7000 Hz.
● TREBLE SLOPE (0...127):
Adjusts the steepness of the treble filter in the range of 3...10dB/octave.
● TREBLE BOOST (-15...+15):
Boosts or cuts the treble up to 15dB.
The Equalizer section has an optional graphical view too (see the
beginning of the Effects Block).
Go to Table of Contents
screenshot at the
53