Panda-Audio Future Impact v3 User Manual page 23

You can save a program to your computer using any name up to 32 characters in
length. (In order to write a program to the FI, the name must begin with a two-digit
prefix between 01 and 99. This prefix determines the slot on the FI to which the
program will be written. When using the Upload to FI function of the
write programs, this prefix is added automatically.)
● Write Program from File to FI: Opens the selected directory and allows you to
select one sound program and write it to the FI.
Remember, the program must have a two-digit prefix at the beginning of its name
before it can be written. If it does not, either add one by renaming it, or easier still,
use the Upload to FI function of the
automatically. We recommend using the Manager to write programs to the FI.
Note: Whilst the Write Program from File to FI command may appear to work even
if you only have one cable connecting the computer to the FI, the Editor Suite will not
receive confirmation of the writing action and an error message will appear; both
cables must be used.
● Write All Programs from Files to FI: Writes all programs from your selected
directory to the FI in a single run.
When you use this option you must have a bi-directional connection between the FI
and the computer, otherwise an error will occur after writing the first program.
If the directory contains two or more files that have the same two-digit prefix then you
will receive an error message and the write process will not be possible until you
have removed the duplicates.
If the directory contains gaps, i.e. if any of the two-digit prefixes between 01 and 99
are not included in the list of program file names, then you will be presented with two
options (the second of which is the one you are most likely to want to use):
1. Press OK to fill the gaps with the Default - the slots in the FI corresponding
to the gaps will be overwritten with the lowest-numbered program in the
directory;
2. Press Cancel to skip the gaps - the slots in the FI corresponding to the gaps
will be ignored and the original programs in those slots will be untouched.
Manager
Go to Table of Contents
and the prefix will be added
Manager to
23