Panda-Audio Future Impact v3 User Manual page 60

● RANGE CTRL:
Click this window to open a pop-up menu with the list of Range Controls:
Above the list is a POLARITY button. This selects whether the range control is
applied positively or negatively. By default it is positive (+). Click the button to
change the polarity.
Click on a Range Control to select it. The menu will close automatically.
To close the menu without selecting a range controller, either select OFF, click the
X or click anywhere in the panels above the menu screen.
Here all the sources shown are external ones; as before, those MIDI sources that
have a default assignment within the FI are shown in white with the name
following it in brackets.
A Range Control is used to give you real-time, direct live control over the depth of
modulation from the source to the destination.
e.g. If the Range Control is PITCH, then the modulation depth from the control
source will change according to whether you play in the lower register or the
higher register of your instrument.
Continuing the example, if the polarity is positive (+) then modulation will increase
as you play from low to high. By contrast, if the polarity is negative (-), the
behavior is reversed.
Range Control is explained in a bit more detail further below.
Go to Table of Contents
60