Midi Implementation - Panda-Audio Future Impact v3 User Manual

MIDI Implementation

The FI will respond to the following standard MIDI messages received on the selected MIDI
channel:
MIDI CC / Default Function in
Name
Note On
Note Off
Aftertouch
Velocity Keyboard velocity
control of filter cutoff
Pitch
Bend
Program
Change
1 LFO depth to VCF and
VCO
Default
the FI Value
0*/127 *0 in SYNTH Mode only.
Go to Table of Contents
--- Active only in MIDI Mode. Also switches
the FI into MIDI mode.
--- Active only in MIDI Mode.
---
--- Active only in MIDI Mode.
--- Active only in MIDI Mode.
--- 1...99 for programs 1...99.
Modulation (CC1) is routed to both VCF
and VCO LFO Modu la tion. The depth set
in the program will be reached if CC1 is at
maximum (127).
(Practically speaking, the modulation
value(s) in the program will be multiplied
with the MIDI controller value / 127.)
Beware: if you use the FI with a keyboard
and set the Mod Wheel to minimum, CC1
will be at 0. If, at this point, you disconnect
the MIDI keyboard and instead play the FI
with your instrument via the audio input,
you will find that there is no LFO
modulation in the programs where you
would expect it; this is because CC1 is still
at 0. You will need to reset CC1 to its
default value of 127 by changing program,
adjusting a flexi slot in the Editor or
powering the FI off and on again.
Notes
77