A Quick Word About Firmware - Panda-Audio Future Impact v3 User Manual

Turn the PARAMETER dial to "Note Off Level" and you will see the name of a parameter in
the display; turn it clockwise to any other position to see that parameter's value. Adjust the
value using the EDIT dial. (You do not need to press the dial afterwards to save it.)
Press the left footswitch again to advance to the next item in the Boot Menu and edit it as
before. When you have finished editing, turn the FI off and on again for the changes to take
effect.
The Reset All function is the first item in the menu; Instrument Mode is the sixth. Their
settings are shown below.
● RESET ALL ("rS")
Value: 0, 1. (Default on reset is 0.)
Change to 1 to immediately reset all Boot Menu settings to their default values. All
sound para meters will be reset to their default value (5) upon power-on. The program
loaded at power-on will be reset to 1.
● INSTRUMENT MODE ("InS")
Value: bSS (Bass), SPL (Split), Gtr (Guitar), Snt (Synth), EUI (EWI). (Default on reset
is bSS.)
Choose the option for your instrument. If your instrument is not listed above then
choose either Bass or Guitar, whichever one best fits the pitch range of your
instrument.
See the Instrument Modes

A Quick Word About Firmware

In order to enjoy all the latest features of your FI you should ensure you have the latest
firmware version installed.
Check the number shown in your pedal's display when powering on. If 3.60 is shown, then
you don't need to do anything further. If a number lower than 3.60 is shown then you will
need to update the firmware; please see the dedicated section on
of the Future Impact v3
section for full details of the different modes.
in the Detailed Manual below to learn how to do this.
Go to Table of Contents
Updating the Firmware
13