The Program Display; On-Screen Keyboard - Panda-Audio Future Impact v3 User Manual

The Program Display

This area in the upper-left corner of the Editor is used to show the currently-loaded sound.
The name and category is shown in the long window. The faux-LCD window shows the
program number (but is blank if the program was loaded via the Manager's Tile Window).
The four load/save/write commands of the File Menu are duplicated here as LOAD, SAVE,
WRITE ONE and WRITE ALL respectively.
Instead of using LOAD each time you want to access a new program, you can simply use
the - and + buttons (or the left and right arrow keys of your keyboard) to scroll through the
programs within your selected directory. You can also use the up and down arrow keys of
your keyboard to change banks.
The INIT button is used to create a basic initialized program which serves as a useful
starting point for a new sound. It is discussed further in the section on Building Your First
Sound.)
Note1: The + and - buttons can only be used to scroll through Local programs (i.e. those
stored in folders on your computer); they cannot be used to scroll through the memory slots
of your pedal, nor can they be used to scroll through Global programs (i.e. those hosted on
our Online Program Database).
Note 2: The Program Display only shows information for Local programs; it does not show a
live readout from your pedal. However, if you have populated the Tile Window of the
Manager with the current contents of your pedal using the DOWNLOAD FROM FI function
and have made no edits to the tiles, then clicking one of the tiles will indirectly allow the slot
number and name of that sound on your pedal to be shown in the Program Display.)

On-Screen Keyboard

In the lower middle part of the Editor screen there is a keyboard. You can use this keyboard
to trigger notes on the FI in order to test the sound. The keyboard is even "velocity sensitive"
Go to Table of Contents
34