Grandstream Networks HT801 Administration Manual page 51

Added option to customize number of failed [Web Access Attempt Limit] to access web GUI
Added option to customize idle time to logout the web access with [Web Session Timeout]
Added option to disable WAN side ports [Blacklist for WAN Side Port]
Added feature "Caller ID Fetch Order" option under FXS port settings. [Caller ID Fetch Order]
Added feature "Enable High Ring Power" option under FXS port settings. [Enable High Ring Power]
Added feature "Internet Protocol" to choose from "IPv4 Only", "IPv6 Only", "Both, prefer IPv4", "Both, prefer IPv6".
[Internet Protocol]
Added feature "IPv6 Address" to configure IPv6 Address. [IPv6 Address]
Firmware Version 1.0.3.7
Added option "Use Actual Ephemeral Port in Contact with TCP/TLS" to force device to use actual ephemeral port. [Use
Actual Ephemeral Port in Contact with TCP/TLS]
Added option "SIP URI Scheme When Using TLS" to choose between 'SIP' and 'SIPS'. [SIP URI Scheme When Using TLS]
Added Option "Backup Outbound Proxy" to use backup Outbound Proxy if Outbound Proxy registration expires. [Backup
Outbound Proxy]
Added option "Prefer Primary Outbound Proxy" to enable registration through primary outbound proxy if registration
expires. [Prefer Primary Outbound Proxy]
Added option "Enable RTCP" to enable RTCP function through Web UI. [Enable RTCP]
Added option "Hold Target Before Refer" to enable device to hold before being referred. [Hold Target Before Refer]
Added Option "Enable Session Timer" to disable session timer. [Enable Session Timer]
Added feature "Conference URI" to support Conference URI. [Conference URI]
Added feature "Whitelist for WAN Side" for remote management. [Whitelist for WAN Side]
Added feature "Blacklist for WAN Side" for remote management. [Blacklist for WAN Side]
Added option "Web Access Mode" to choose between "HTTPS" and "HTTP" to access device Web UI.
Added feature "HTTPS Web Port" to set HTTPS web port instead of using default HTTPS port. [HTTPS Web Port]
Added feature "SSH Port" to self-configure SSH port. [SSH Port]
Added SNMP related features.
Firmware Version 1.0.3.2
This is the initial version for HT801.
Added option "DNS SRV use Registered IP" [DNS SRV use Registered IP].
Changed default NTP server from us.pool.ntp.org to pool.ntp.org.
Firmware Version 1.0.2.5
Changed OPUS Payload Type default value to 123 to match other GS products. [OPUS Payload Type].
Firmware Version 1.0.2.3
Added a re-enter box to confirm change user and admin password on web GUI to avoid typo or mistakes [Confirm Admin
Password][Confirm End User Password].
Add new iLBC libraries to improve iLBC audio quality.
Firmware Version 1.0.1.9
This is the initial version.