Grandstream Networks HT801 Administration Manual page 12

VPN
IPv4 Displays assigned OpenVPN IPv4 address.
Address
VPN
IPv6 Displays assigned OpenVPN IPv6 address.
Address
Product
Displays product model info. Default is HT801/HT802.
Model
Hardwa
re Displays the hardware revision information and the part number.
Version
Program: Specifies Program version. This is the main firmware release number, which is always used for
identifying the software system of the HT801/HT802.
Bootloader: Specifies Boot version.
Softwar
e Core: Specifies Core version.
version
Base: Specifies Base version.
CPE: Specifies CPE version. CPE version is displayed only when HT801/HT802 is connected to an ACS using
TR-069 protocol.
Softwar
Indicates actual software status.
e Status
System
Up Indicates actual system time and uptime since the last reboot.
Time
CPU
Indicates CPU load (%)
Load
Networ
Indicates physical network cable status:
k Cable
Status (Up/Down), Speed (Mbps), Operational Mode (Full/Half Duplex)
Status
PPPoE
Indicates PPPoE connection status.
Link Up
NAT Indicates the type of NAT when it is configured.
Port Displays relevant information regarding the FXS ports, their registration, current status, and their appropriate
Status User ID.
Port
Displays DND and call forward information on FXS ports.
Options
CDR Download, Preview. Or Delete call history records from the web GUI. Only the last 1000 records will be
File available.
Download, Preview or, Delete locally stored SIP trace.
SIP File
Note: "Send SIP Log" must be enabled to be able to capture the trace.