Grandstream Networks HT801 Administration Manual page 15

Enable Management Interface
Management Access
Enable SNMP Through Management
Interface
Enable TR-069 Through Management
Interface
Enable Syslog Through Management
Interface
Management Interface IPv4 Address
Time Zone
Self-Defined Time Zone
Allow DHCP server to set Time Zone
Language
Reset Type
● DHCP mode: all the field values for the static IP mode are not used (even though
they are still saved in the flash memory.) The HT801/HT802 acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
● Static IP mode: configure IP address, 1st and 2nd DNS server, preferred DNS
server. These fields are set to zero by default.
● Full Static: When enabling the option full static, users need to specify the Static
IPv6 and the IPv6 Prefix length.
● Prefix Static: When enabling the option prefix static, users need to specify the
IPv6 Prefix (64 bits).
Allows administrator to setup a Virtual Network Interface on top of the physical
interface for device management. Default is No.
Chooses whether to access using "Management Interface Only" (Default) Or "Both
Service and Management Interfaces"
This feature allows users to route SNMP packets through the management
interface. The default setting is "No".
This feature allows users to route TR069 packets through the management
interface. The default setting is "No".
This feature allows users to route Syslog packets through the management
interface. The default setting is "No".
Configures Voice VLAN Type :
● Default is dynamically assigned via DHCP
Or,
● statically configured as:
○ IP Address : Default is 192.168.100.100
○ Subnet Mask : Default is 255.255.255.0
○ Default Router : Default is 192.168.100.1
○ DNS Server 1 : Default is 0.0.0.0
○ DNS Server 2 : Default is 0.0.0.0
● 802.1Q/VLAN Tag
vlan tagging : [0 – 4094]; Default is 0
● 802.1p priority value :
priority : [0 – 7]; Default is 0
Selects time zone to define date/time on the device.
Allows users to define their own time zone.
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will
override selected time zone. If set to "No", the analogue adapter will use selected
time zone even if provided by DHCP server.
The Default setting is Yes.
Configures the languages of the voice prompt and web interface, except Spanish
that it is only in IVR. Available languages: English, Chinese, Traditional Chinese,
Russian, Spanish IVR.
Gives the administrator the option to restore default configuration on the
HT801/HT802.
There are 3 types of factory reset: