Grandstream Networks HT801 Administration Manual page 17

certificate
Firmware Server Path
Config Server Path
XML Config File Password
HTTP/HTTPS FTP/FTPS Username
HTTP/HTTPS FTP/FTPS Password
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Enable using tags in URL
Always send HTTP Basic
Authentication Information
Allow DHCP Option 66 or 160 to
Override Server
Additional Override DHCP Option
3CX Auto Provision
Automatic Upgrade
It is set to no upgrade by Default.
Sets IP address or FQDN of firmware server. The URL of the server that hosts the
firmware release. Default is fm.grandstream.com/gs.
Sets IP address or FQDN of configuration server. The URL of the server that hosts
the configuration file to provision HT8xx.
Default is fm.grandstream.com/gs.
Decrypts XML configuration file when encrypted. The password used for encrypting
the XML configuration file using OpenSSL.
Enters username to authenticate with HTTP/HTTPS FTP/FTPS server.
Enters password to authenticate with HTTP/HTTPS FTP/FTPS server.
Checks if firmware file is with matching prefix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
firmware server.
Checks if firmware file is with matching postfix before downloading it.
This field enables user to store different versions of firmware files in one directory
on the firmware server.
Checks if configuration files are with matching prefix before downloading them. This
field enables user to store different configuration files in one directory on the
provisioning server.
Checks if configuration files are with matching postfix before downloading them.
This field enables user to store different configuration files in one directory on the
provisioning server.
Allows users to configure variables on the configuration server path to differentiate
the directories on the server.
Default is No. If set to Yes, The device will send configured user name and password
within HTTP request before server sends authentication challenge.
Obtains configuration and upgrade server's information using options 66 from DHCP
server.
Note: If DHCP Option 66 is enabled, the HT8xx will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config Server Path
is left blank.
The server URL provided by DHCP can include authentication credentials using
following format: "username:password@Provisioning_Server_IP".
Allows users to enable the Additional Override DHCP Option in Option 150. The
default value is "None".
Sends multicast "SUBSCRIBE" message for provisioning at booting stage, used for
PnP (Plug-and-Play) configuration. Default is Yes.
Specifies when the firmware upgrade process will be initiated; there are 4 options:
No: The HT8xx will only do an upgrade once at boot up.
Check every X minutes: User needs to specify a period in minutes.
Check every day: User needs to specify the start hour and the end hour of the day
(0-23).
Check every week: User needs to specify "Day of the week (0-6)". (Day of week is
starting from Sunday).