Grandstream Networks HT801 Administration Manual page 19

Gen-2 EC private key
Enable TR-069
TR-069 firewall rules
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request Username
Connection Request Password
Connection Request Port
CPE SSL Certificate
CPE SSL Private Key
Enable SNMP
SNMP Version
SNMP Port
SNMP Trap IP Address
SNMP Trap port
SNMP Trap Version
SNMP Trap Interval
SNMPv1/v2c Community
SNMPv1/v2c Trap Community
SNMPv3 Username
SNMPv3 Security Level
Configures the Gen-2 Elliptic Curve Private Key. based on RFC 5915.
The Max value length is 8192 characters.
Sets the phone adapter system to enable the "CPE WAN Management Protocol" (TR-
069). Default setting is Yes.
Configures the TR-069 firewall rules , Value port range is 1-65535
Specifies URL of TR-069 Auto Configuration Servers (e.g.,
http://acs.mycompany.com), or IP address.
Default setting is: "https://acs.gdms.cloud"
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is Yes.
Sets frequency that the inform packets will be sent out to ACS.
Default is 86400 seconds.
Enters username for ACS to connect to the HT8xx.
Enters password for ACS to connect to the HT8xx.
Configures the TR-069 connection request port. The value range is 0 to
65535.Default is 7547
Configures the Cert File for the phone adapter to connect to the ACS via SSL.
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Default is No.
Choose between (Version 1, Version 2c, or Version 3).
Listening Port of SNMP daemon (Default 161).
IP address of trap destination. Up to 3 trap destinations are supported. Users should
enter the IP addresses separated with comma (,).
Port of Trap destination (Default 162)
Choose between (Version 1, Version 2c, or Version 3).
Time interval between traps (Default is 5).
Name of SNMPv1/v2c community.
Name of SNMPv1/v2c trap community.
Username for SNMPv3.
noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.
authUser: Users with security level authNoPriv and context name as auth.