Grandstream Networks HT801 Administration Manual page 37

SRTP per call Feature
CID Feature
CID per call Feature
Direct IP Calling Feature
CW Feature
CW per call Feature
Call Return Feature
Unconditional Forward Feature
Busy Forward Feature
Delayed Forward Feature
Paging Feature
DND Feature
Blind Transfer Feature
Disable LEC per call Feature
Disable Bellcore Style 3-Way
Conference
Star Code 3WC Feature
Forced Codec Feature
– Enable SRTP per call: Default is 18
– Disable SRTP per call: Default is 19
Allow users to customize the CID feature codes. Default is Yes
– Enable CID: Default is 31
– Disable CID: Default is 30
– Enable CID per call: Default is 82
– Disable CID per call: Default is 67
Allow users to customize the Direct IP feature code. Default is Yes
– Direct IP Calling: Default is 47
Allow users to customize the CW feature codes. Default is Yes
– Enable CW: Default is 51
– Disable CW: Default is 50
– Enable CW per call: Default is 71
– Disable CW per call: Default is 70
Allow users to customize the Call Return feature code. Default is Yes
– Call return: Default is 69
Allow users to customize the Unconditional Forward feature codes.
Default is Yes
– Enable Unconditional Forward: Default is 72
– Disable Unconditional Forward: Default is 73
Allow users to customize the Busy Forward feature codes. Default is Yes
– Enable Busy Forward: Default is 90
– Disable Busy Forward: Default is 91
Allow users to customize the Delayed Forward feature codes. Default is Yes
– Enable Delayed Forward: Default is 92
– Disable Delayed Forward: Default is 93
Allow users to customize the Paging feature code. Default is Yes
– Paging: Default is 74
Allow users to customize the CW feature codes. Default is Yes
– Enable DND: Default is 78
– Disable DND: Default is 79
Allow users to customize the Blind Transfer feature code. Default is Yes
– Enable Blind Transfer: Default is 87
Default is Yes
– Disable LEC per call: Default is 03
Gives the users the possibility of making conference calls by pressing "Flash" key,
when it is enabled by dialing *23 +second callee number. Default is No
Default is Yes
– Star Code 3WC: Default is 23
Allow users to customize the Forced Codec feature code. Default is Yes
– Forced Codec: Default is 02