Command #155: Get Event Index; Command #156: Read Calibration Event Log - MSA General Monitors OBSERVER-i User Manual

Command-Specific Response Codes
Code
0
1 – 2
3
4
5
6 – 127

10.16 COMMAND #155: GET EVENT INDEX

This command reads the event logged index.
Request Data Bytes
Byte
None N/A
Response Data Bytes
Byte
Unsigned – 8
0
Command-Specific Response Codes
Code
0
1-127

10.17 COMMAND #156: READ CALIBRATION EVENT LOG

This command reads the Calibration Event Log as specified by the event log number. Event 0 is the
most recent event. Event 1 is the one just before that and so forth.
Request Data Bytes
Byte
None N/A
Class
Success No Command-Specific Errors
Undefined
Error Passed Parameter Too Large
Undefined
Error Too Few Data Bytes Received
Undefined
Format
N/A
Format
Event index
Class
Success No Command-Specific Errors
Undefined
Format
N/A
Description
Description
Description
Description
Description
20
OBSERVER-i HART