MSA ALTAIR Pro Quick Start Manual-Setup

Begin setup here activating the single gas detector

Hide thumbs Also See for ALTAIR Pro:

Activating the



Need to change factory set points?  Turn page over



Activate/Turn-on  See inset below



Fresh-Air Setup  Turn page over

* ALTAIR Pro Single-Gas Detectors must be activated

within 6 months of manufacture.

Begin Setup Here

ALTAIR Pro

Single Gas Detector



PRESS and HOLD the

5 seconds

for

Scroll through menu displays.

Gas detector is ready for use.

TEST

button

until

displays.

Table of Contents

Need help?

Do you have a question about the ALTAIR Pro and is the answer not in the manual?

Page 1 Fresh-Air Setup  Turn page over  TEST PRESS and HOLD the button 5 seconds until displays. Scroll through menu displays. Gas detector is ready for use. * ALTAIR Pro Single-Gas Detectors must be activated within 6 months of manufacture.
Page 2 The quick start card provides only a brief description of the operating instructions for the ALTAIR Pro Single-Gas Detector. The user of this instrument must be fully aware of the limitations and instructions supplied in the operating instruction manual. Failure to follow the instructions may lead to serious personal injury or death.