Getting Started; Publishing The Icb Professional Files - Nortel ICB Administrator's Manual

Getting started

To use the ICB Professional form for the first time, go to "Publishing the
ICB Professional files" below.
To upgrade the ICB Professional form, go to
Professional form

Publishing the ICB Professional files

ICB Professional files must be published in Microsoft Outlook before
ICB Professional users can access and use the ICB Professional form
to schedule ICB Professional conferences.
Nortel recommends that the Microsoft Outlook administrator publish the
ICB Professional files in the Organizational Forms Library. If the ICB
Professional files are not published by the Microsoft Outlook
Administrator, users themselves must publish the ICB Professional files
in the Personal Forms Library. Refer to Nortel Integrated Conference
Bridge Professional User Guide.
When publishing upgraded files, be sure to remove the older versions
from the library. Use the steps in
from the Organizational Forms Library
Note 1: Do not perform this procedure if the ICB Professional files
have already been published by the Microsoft Outlook administrator.
Note 2: These instructions are specific to Microsoft Outlook 2003.
Note 3: Now double click on one of the secondary forms according
the supported languages by MS Outlook in the organization. In the
following example English secondary form is used.
Note 4: The Forms names are case sensitive. They must be written
as described below.
1 For each language file (ICBPs.oft, ICBPsh.oft, etc) you are
Nortel Integrated Conference Bridge Professional
language files, one or more required for each ICB Professional
application:
⎯ ICBPsjc.oft - for the Japanese and Chinese languages
⎯
ICBPsk.oft - for the Korean language
⎯
ICBPsr.oft - for the Russian language
⎯
ICBPsh.oft - for the Hebrew language
⎯
ICBPs.oft - for all other supported languages
(page 86).
publishing:.
Microsoft Outlook User Interface
Upgrading the ICB
Removing ICB Professional files
(page 87).
83
Administrator Guide