E1/T1 Isdn Trunk Configuration - Nortel ICB Administrator's Manual

E1/T1 ISDN Trunk Configuration

This section defines process to configure E1/T1 trunks parameters.
1 Log in to the Web Browser. See
2 Click Install Wizard on the Console.
3 Click E1/T1 ISDN on the left-hand side of the ICB Professional
Figure 10: Install Wizard
E1/T1 ISDN panel
4 In the Protocol field, select the ISDN PRA protocol type - Europe
5 In the Side field, select the Network side.
Nortel Integrated Conference Bridge Professional
c Click Finish to save the changes and return to the Console.
d Click Console in the title frame to return to the Console without
saving the changes.
(page 17).
The ICB Professional Install Wizard window opens to the Basic
system Settings panel, see figure in
Settings (page 22).
Install Wizard window.
The E1/T1 ISDN panel opens, as shown in following figure.
(E1) or North America (T1).
Browser User Interface
Accessing the Web Browser
Configuring Basic System
Administrator Guide
27