Nortel ICB Administrator's Manual page 46

46 Browser User Interface
Figure 20
User Groups - New User Group window
2 Enter Group name in the field and specify number of ports for the
3 User Groups - This optional feature allows partitioning of ICB
Standard 01.01 June 2007
The New User Group window opens, as shown in following figure.
group.
Professional system resources (ports) to several user groups. Each
group has a number of ports guaranteed for their own use. Ports that
are not allocated to any group are shared between all users. Initially
only one group exists - System Group. This is a special group with
0 ports, hard coded. In a trivial system with no user groups, all users
belong in this group. A simple example: a system with total of 60
ports. It has the following groups:
⎯
System group: 0 ports
⎯
Group A: 10 ports
⎯ Group B: 20 ports
This leaves 30 not allocated ports: 60 - (10+20) Users of group A
may use up to 40 ports, but only 10 are guaranteed for the group.
Users of group B may use up to 50 ports, but only 20 are
guaranteed. All other users (in System group) may use up to 30
ports.
For defining a new User Group two parameters are required: name
(free text) and
number of ports to reserve for this group.