Adding The Cti Folders And Data Cards - Nortel CTI ToolKit User Manual

Adding the CTI Folders and Data Cards

# P0606089 Ver: 1.1
To manipulate data with the blocks of the CTI Toolkit, the CTI folder must first be
installed. The CTI folder is a hierarchy of folders, subfolders, and data cards that are
used to transfer data to and from CTI specific resources.
The include folders path is determined by the environment variable PPROPATH,
which is automatically set during installation. PPROPATH contains a list of directory
names separated by semicolons. The directories are searched in the order they are
listed.
Before adding the CTI folders, modify the PPROPATH variable to include the
$ PPROHOME / ctitools and $ PPROHOME / ctitools / folders directories.
To view the current PPROPATH value, issue the following command:
echo $PPROPATH
The CTI.resource data card defaults to cti . If the CTI resource name is cti , the
CTI.resource data card does not have to be changed. Otherwise, the CTI.resource
data card has to be set to the name of the CTI resource. Gencti is useful if the CTI
resource name (VAPI's service name) is different.
To import the CTI folder:
1. Click the Folders... button in the Toolkit window to display the Manage
Data Folders window. System is the default folder.
2. Add a CTI folder:
a. Remove System from the Name field and type CTI .
Nortel Networks Confidential
Toolkit Installation and Removal Procedures
Page 25