Cti Toolkit Blocks Reference; Cti Programming; Configuration Requirements; Folders And Data Cards - Nortel CTI ToolKit User Manual

Periproducer cti toolkit for m1
Table of Contents

Advertisement

PeriProducer CTI Toolkit User's Guide for M1

CTI Toolkit Blocks Reference

CTI Programming

Page 28
This chapter describes the functions of each CTI Toolkit block. For more information,
see
Example Applications on page 56

Configuration Requirements

The following pertains to the development of PeriProducer CTI applications. See the
MPS Interface to M1 manual for specific information about software configuration.
To allow the ACD (M1 or SCCS) to transfer a call to an IVR port, that IVR
phone line must be configured in the switch as an agent phone.
To allow call transfers to a live agent, the agent's phone line also has to be set
up in the switch and/or SCCS to be part of an ACD queue or CDN (but
usually a different ACD queue or CDN than is used for IVR ports).
All CDNs, queues, and IVR port agent phones must be registered in the IPML
using the Periview IPML Configuration tool as Agent Position IDs.

Folders and Data Cards

The following symbols indicate how data for each parameter is transferred within
each CTI block.
Signifies that data is being sent to a data card.
Signifies that data is being received from a data card.
Although information gathered from calls is stored in system folders, Nortel Networks
recommends that critical information be copied to local folders and data cards to
ensure that the data is not overwritten by other operations.

Error Condition Handling

Typically, when a block is executed, it makes data requests of the switch or SCCS
system. If a request succeeds, the application receives an oc (output complete)
condition. If a request fails, the application receives an of (output failure) condition.
These conditions are generated from CSVAPI for the set of CTI blocks, or from
CSTAPI for the two TAPI blocks. Normally, both the oc and of conditions are
handled internally. However, they can be handled explicitly at the discretion of the
application developer.
Nortel Networks Confidential
and
Example Log Files on page
74.
# P0606089 Ver: 1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Periproducer cti toolkitPeri-ipml v2.1

Table of Contents