Verifying The Dds Tape Drive Operation - HP C160 Owner's Manual

Verifying the DDS Tape Drive Operation

To verify that your workstation can communicate with the DDS-format tape
drive, enter the following:
/usr/sbin/ioscan -d stape
After a few moments the ioscan utility returns a message similar to the fol-
lowing:
H/W Path
============================================
8
8/16
8/16/5
8/16/5.3
8/16/5.3.0
If ioscan does not see your tape drive, it will return the following message:
ioscan: No hardware found
If you receive this message, go to Chapter 5, "Solving Problems."
Using Your Digital Data Storage (DDS) Tape Drive
Class
bc
bc
ba
ext_bus
target
tape
Operating the DDS Tape Drive
Description
I/O Adapter
Core I/O Adapter
Built-in SCSI
HP HP35480A
53